Ultimate ZeD Printers · Guide · Artwork and dielines
Packaging artwork guide
Dielines, bleed, safe zones, colour and file formats: how to set up packaging artwork so it prints, cuts and folds exactly as designed.
The short answer: print-ready packaging artwork is built on the box dieline (the flat cutting and folding template), with background colours extended at least 3 mm past the cut line as bleed, text and logos kept at least 3 mm inside cut and fold lines, colours set in CMYK or Pantone, and supplied as a print-ready PDF with the dieline on its own non-printing layer.
Why print-ready artwork matters for packaging
A box is printed flat, cut out with a steel die, then creased and folded into three dimensions. Artwork that looks right on screen can come back with a logo across a fold, text trimmed off at an edge or a colour that prints darker than expected. Most of these problems are avoided by setting up the file correctly before it goes to press. This guide covers the essentials: dielines, bleed, safe zones, colour, images and the file to send.
What is a dieline?
A dieline is the flat template of your box. It shows where the sheet will be cut, where it will be creased and folded, and where glue flaps sit. Every box style and size has its own dieline, so the artwork has to be built on the exact template for your box rather than on a generic one.
- Cut lines mark the outer shape the die will cut.
- Crease or fold lines mark where the board will be scored and folded.
- Glue areas are usually left free of ink so the adhesive holds.
Keep the dieline on its own layer, drawn in a single named spot colour, and set it so it does not print. Ask for the dieline before you start designing. We prepare dielines for the box styles we produce, including rigid boxes, food cartons and bakery boxes.
How to mark fold lines correctly on packaging artwork
Mark fold lines on the dieline layer, not in the artwork itself. Draw them in the same single named spot colour as the cut lines (fold lines are usually dashed and cut lines solid, so the two are easy to tell apart), set that layer to non-printing, and never move or redraw a fold line from the template you were given. Then check the artwork against them: keep text, logos and barcodes at least 3 mm away from every fold, and avoid thin lines or small text running exactly along a crease.
Bleed and safe zone
Cutting is precise but not perfect, so the artwork needs room on both sides of every cut line.
- Bleed: extend background colours and images at least 3 mm beyond the cut line, so no white edge shows if the cut moves slightly.
- Safe zone: keep text, logos and barcodes at least 3 mm inside cut and fold lines, so nothing important is trimmed or wraps around a corner.
- Folds: avoid placing thin lines or small text exactly on a crease, where the board can crack slightly.
Colour: CMYK, Pantone and rich black
Packaging is printed with inks, not light, so screen colours (RGB) have to be converted. Doing this yourself before sending the file avoids surprises.
- CMYK: build the design in CMYK. Bright RGB greens, blues and oranges often look duller once converted, so check them early.
- Pantone (spot) colours: if a brand colour has to match exactly across every run, specify it as a Pantone reference rather than a CMYK mix.
- Rich black: large black areas look deeper as a rich black (black plus some cyan, magenta and yellow). Keep small text in 100% black only, so it stays sharp.
- Screens differ: no monitor shows print colour exactly. For colour-critical jobs, approve a printed proof rather than a screen preview.
Images, fonts and fine detail
- Image resolution: photographs should be 300 dpi at the size they will print. An image pulled from a website is usually far too low.
- Logos and icons: supply them as vector artwork (AI, EPS, SVG or vector PDF), so edges stay crisp at any size.
- Fonts: convert text to outlines or embed fonts in the PDF, so nothing is substituted.
- Small text and thin lines: very small type and hairline rules can break up on board. Keep body text comfortably legible and avoid lines thinner than about 0.25 pt, especially when they are reversed out of a dark colour.
- Barcodes: print barcodes in solid black on a light background, at a size your retailer or barcode supplier accepts, and away from folds.
Artwork for foil, spot UV and embossing
Each special finish is made from its own artwork layer. Supply foil, spot UV, embossing and debossing as separate layers or files in solid vector shapes, lined up exactly with the printed design. Our guide to packaging print finishes explains what each finish does and how to set it up.
What file to send
- A print-ready PDF with bleed, fonts outlined or embedded and the dieline on its own non-printing layer.
- The original source file (Illustrator, InDesign or Photoshop), so small corrections can be made without rebuilding the design.
- A note of any Pantone references and special finishes, and the quantity you need.
Proofs before printing
Before a job goes to press you should see and approve a proof. A digital proof confirms layout, text and positions on the dieline. For new box styles or colour-critical work, a physical sample or printed proof shows how the design folds and how colours print on the chosen board. Check every word, number and barcode at this stage, because changes after printing mean reprinting.
Do not have print-ready files?
That is common, and you do not need to become a pre-press expert. Our in-house studio designs packaging and prepares artwork for press, so you can send a logo, a rough layout or just your idea and we build the file on the correct dieline. Brands in Australia can talk to our Sydney office, or see our custom packaging for Australian brands. If you are still choosing a box style, read rigid boxes vs folding cartons first.
Questions
Before you ask for a quote
- Where do I get the dieline for my box?
- Ask your printer for it before you start designing. Every box style and size has its own dieline. Tell us the box style and your product dimensions and we prepare the dieline for you to design on.
- How much bleed does packaging artwork need?
- Extend backgrounds and images at least 3 mm beyond every cut line, and keep text, logos and barcodes at least 3 mm inside cut and fold lines.
- Should packaging artwork be in RGB or CMYK?
- CMYK, because packaging is printed with inks. Use Pantone references for brand colours that must match exactly, and approve a printed proof for colour-critical work.
- Can you design the packaging as well as print it?
- Yes. Our in-house studio handles packaging design, branding and artwork in Photoshop, Illustrator, InDesign and Figma, and the same team prepares the file for press.
Let's put it on paper.
Send us your product, your artwork or just your idea. We come back with a specification and quotation, usually within one working day.